徐众,吴恩辉,李军,侯静,黄平,蒲权文.化学通报,2020,83(5):453-458.
活性炭/有机质复合相变材料的热-电性能
Thermo-Physical and Electrical Properties of Activated Carbon/Organic Matter Composite Phase Change Materials
投稿时间:2019-11-20  修订日期:2019-12-31
DOI:
中文关键词:  复合相变材料  热稳定性  温度分布  充-放热  导热系数  电阻率
英文关键词:Composite phase change materials  Thermal stability  Temperature distribution  Thermal storage and release  Thermal conductivity  Electrical resistivity
基金项目:攀枝花大学科技园发展有限责任公司种子基金“双创”项目(2019-07)、国家级大学生创新项目(201911360002)、四川省教育厅太阳能高校重点实验室项目(2018TYNSYS-Y-04)和攀枝花市指导性科技计划项目(2019ZD-S-27)资助
作者单位
徐众 攀枝花学院钒钛学院
四川省太阳能利用技术集成工程实验室
太阳能技术集成及应用推广 四川省高校重点实验室 攀枝花 617000 
吴恩辉 四川省太阳能利用技术集成工程实验室
太阳能技术集成及应用推广 四川省高校重点实验室 攀枝花 617000 
李军 四川省太阳能利用技术集成工程实验室
太阳能技术集成及应用推广 四川省高校重点实验室 攀枝花 617000 
侯静 攀枝花学院钒钛学院
四川省太阳能利用技术集成工程实验室
太阳能技术集成及应用推广 四川省高校重点实验室 攀枝花 617000 
黄平 四川省太阳能利用技术集成工程实验室
太阳能技术集成及应用推广 四川省高校重点实验室 攀枝花 617000 
蒲权文 攀枝花学院钒钛学院 
摘要点击次数: 1195
全文下载次数: 0
中文摘要:
      用活性炭(AC)作为支撑材料,石蜡(PW)、十六酸(PA)和硬脂酸(SA)作为相变主材,通过熔融共混法制备AC/PW、AC/PA和AC/SA复合相变材料,并考察了其热-电性能。结果表明,添加活性炭时有机质均不会泄漏;复合材料充-放热过程中温度场分布都比较均匀,热循环会使材料导热性能略有下降;此外,三种复合材料的电阻率均随压力增加而减小。
英文摘要:
      Composite phase change material AC/PW, AC/PA and AC/SA were prepared by melt blending using activated carbon (AC) as supporting material and paraffin (PW), palmitic acid (PA) and stearic acid (SA) as main phase change materials, and their thermal and electrical properties were studied by infrared thermal imager, thermal conduction coefficient and powder semi-conductor resistance tester. The results showed that organic matter will not leak when activated carbon is added, and the temperature field distribution during the charging and exothermic process of the composite is relatively uniform. Thermal cycling will slightly reduce the thermal conductivity of the material. In addition, the electrical resistivity of the three composite materials decreases with the increase of pressure.
查看全文  查看/发表评论  下载PDF阅读器
关闭