张梦晗,陈宏,张晗,励建荣.化学通报,2016,79(2):175-178.
薄膜梯度扩散-分光光度法富集测量水中痕量Mo (VI)
Determination of Mo (VI) in water by the diffusive gradients in thin-films techniquecombined with potassium thiocyanate spectrophotometry
投稿时间:2015-08-09  修订日期:2015-09-16
DOI:
中文关键词:  Mo (VI) 薄膜梯度扩散  分光光度法 聚季铵盐  
英文关键词:Molybdenum (VI), Diffusive  gradients in  thin-films, Spectrophotometry, poly (quaternary  ammonium salt), Water
基金项目:辽宁省食品安全重点实验室暨辽宁省高校重大科技平台开放课题项目(No.LNSAKF2011038)资助
作者单位E-mail
张梦晗* 渤海大学化学化工与食品安全学院 渤海大学食品科学研究院 辽宁省食品安全重点实验室 锦州 121013 1196042634@qq.com 
陈宏 渤海大学化学化工与食品安全学院 渤海大学食品科学研究院 辽宁省食品安全重点实验室 锦州 121013  
张晗 渤海大学化学化工与食品安全学院 渤海大学食品科学研究院 辽宁省食品安全重点实验室 锦州 121013  
励建荣 渤海大学化学化工与食品安全学院 渤海大学食品科学研究院 辽宁省食品安全重点实验室 锦州 121013  
摘要点击次数: 2346
全文下载次数: 0
中文摘要:
      建立了薄膜梯度扩散(DGT)- 硫氰酸钾(PT)分光光度法(DGT-PT法)富集测量水中痕量Mo (VI) 的分析方法。本研究先以聚季铵盐(PQAS)溶液为结合相的DGT技术 (PQAS DGT) 原位分离富集水中Mo (VI),再以PT分光光度法测定DGT结合相中Mo (VI)的含量,最后依据DGT方程计算水中Mo (VI)的浓度。DGT-PT法测得配制水中Mo ( VI) 的回收率为96.3% ~ 101.3%,相对标准偏差(RSD)为1.3% ~4.0%;测得工业废水中Mo (VI) 的浓度为27.13 ~ 121.79mg/L,加标回收率为96.0% ~ 101.6%。当采样时间为48h,PQAS DGT对水中Mo (VI) 富集近18倍,可显著降低分析方法的检测限,实现水中痕量Mo (VI) 的定量检测。
英文摘要:
      Mo (VI) in water was pre-concentrated by the diffusive gradients in thin-films (DGT) technique with Poly (quaternary ammonium salt) (PQAS) as binding phase (PQAS DGT) and measured by potassium thiocyanate (PT) spectrophotometry. The recoveries of Mo (VI) in the synthetic solutions measured by the DGT-PT method were 96.3% ~ 101.3% with relative standard deviation (RSD) 1.3% ~ 4.0%. The concentration of Mo (VI) in industrial wastewaters measured by the DGT-PT method was 27.13 ~ 121.79 mg/L with recoveries of 96.0% ~ 101.5%. The enrichment factor of Mo (VI) pre-concentrated by PQAS DGT was 18 (deployment time 48h). Therefore, the DGT-PT method can be used to measure trace Mo (VI) in water.
查看全文  查看/发表评论  下载PDF阅读器
关闭