| 陈姬亮,张贻川.化学通报,2020,83(2):179-182. |
| 聚碳酸酯/碳纳米管复合热电材料的制备与性能研究 |
| Preparation and Performances of Polycarbonate/Carbon Nanotubes Thermoelectric Composites |
| 投稿时间：2019-09-17 修订日期：2019-10-15 |
| DOI： |
| 中文关键词: 聚碳酸酯 复合材料 热电性能 碳纳米管 |
| 英文关键词:Polycarbonate Composites Thermoelectric performance Carbon nanotubes |
| 基金项目: |
|
| 摘要点击次数: 1593 |
| 全文下载次数: 0 |
| 中文摘要: |
| 本文首先通过溶液混合法将碳纳米管（CNTs）分散到聚碳酸酯（PC）基体中，然后将获得的PC/CNT絮状物通过高温模压的方法制备了一种柔性的高热电性能PC/CNT复合材料。PC/CNT复合材料断面形貌分析表明，CNTs均匀地分散在PC基体中。此外，PC/CNT复合材料的导电性随着CNTs含量的增加而急剧增加，而Seebeck系数几乎保持恒定，使得材料的功率因子随着CNTs含量的增加而快速增加，最大功率因子达到4.6μW·m-1·K-2。 |
| 英文摘要: |
| Carbon nanotubes (CNTs) were dispersed in polycarbonate (PC) matrix by solution method. Then the obtained PC/CNT flocculation was used to prepare the flexible thermoelectric PC/CNT composites by compression molding. The fractured morphology of PC/CNT composite suggested that CNTs are distributed homogenously in the PC matrix. Besides, with increasing CNT contents, the electrical conductivities increase dramatically whereas the Seebeck coefficients nearly remain constant. This leads to the rapid increasing trend of power factor with CNT content for the PC/CNT composites. The maximum power factor is 4.6 μW·m-1·K-2. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |